![BLK_HRZT_1-01.png]](https://info.cubiscan.com/hs-fs/hubfs/BLK_HRZT_1-01.png?height=40&name=BLK_HRZT_1-01.png){kind=small}
CIS
Cubiscan 200-TS, 200-SQ, 200-B, 275, 225, Freightweigh 150, Print and Apply, Check weigher, Sortation, Controls, Manifest, Scanning
Cubiscan 200TS
- Cubiscan 200TS | Gate Sensor Testing
- Cubiscan 200-TS | Scale Error
- Cubiscan 200TS | Photo Sensor Error 2125 or 2136, Error 51 in Qbit Software
- Cubiscan 200TS | Display <=> Conveyor Disconnect error
- Cubiscan 200TS | Inverter A or B Under-voltage error
- Cubiscan 200TS | Non-Cuboidal Box (Error 73 In QBitIMS Window)
- Cubiscan 200TS | Front/Rear Gap is too short (Error 21, Error 22 In Qbit Software Window)
- Cubiscan 200TS | Error: Box Outside of Measurement Area (Error 72 in Qbit Software)
- Cubiscan 200TS | Box Length, Width, or Height is too Small/Large (Error 11, or Error 1 in Qbit Software)
- Cubiscan 200TS | Dimension Calculation Failure (Error 71 in Qbit Software)
- Cubiscan 200TS | Scale Error 2126, Zero Tracking Error, (Error 55 in Qbit Software)
- Cubiscan 200TS | Power Supply Failure
Advantech PC
Print & Apply
- Print & Apply | Print and apply printing 2 labels
- Print & Apply | Label Prints, but the applicator does not apply it to the box
- Print & Apply Machine | Will not print a label
- Print & Apply Machine | Labels print out blank on all labels
- Print & Apply | Phoenix Machine
- Print & Apply | Zebra ZE511 Print Engine
- Print & Apply | Zebra ZE500 Print Engine